An Interview with Armory Technologies CEO Alan Reiner ...

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

The First-generation Terminal — MoonBot

The First-generation Terminal — MoonBot

Moonbot
Our team has developed and is supporting the trading terminal MoonBot which was introduced in October 3, 2017. Currently, the performance of MoonBot surpasses that of most existing trading systems as a result of its advanced functionality and the high security features designed to protect your trading activities.
Secure Connection to the Exchange
The connection from MoonBot to an Exchange is carried out using special keys that the user receives from an exchange such as Binance or Bittrex.
MoonBot connects securely to cryptocurrency trading Exchanges through two special keys which are uniquely and only known to their owner. These are the API key, and the Secret key, both of which the users receives directly from the Exchange.
The MoonBot terminal then receives data and information from the exchange’s API collected at several different access levels, including:
Public information (publicly accessible data related to trading in general):
  • charts;
  • quotes;
  • orderbook;
  • real-time executed orders.
  • Authenticated information (unique to the users and which requires authentication access using the special keys): personal account status (wallet balances);
  • user transactions (such as the details of executed trades).
After receiving the various data information from the exchange, the terminal records these data in a local database for further processing and application.
Security Systems
The MoonBot terminal provides completely private storage of all your personal data!
The MoonBot team has absolutely no access to personal data, you are the only one controlling its security and have complete control over access to your details.
The MoonBot team are not able to withdraw, nor to move, any funds from your personal Exchange account or wallet.
You can therefore safely use the terminal for trading, receiving public information from the Exchange, and should you wish to share with others, the trading data on your account.
You therefore are the only person with control and access to your Exchange wallet, and can be completely assured of the absolute security of your private funds.
Lightning-fast Execution of the Orders on the Exchange and Order Status Update
Depending on the distance of the user from the exchange servers, the delay in order execution should not exceed 1 second. Theoretically, the delay can be reduced to a minimum intangible — 10–20 ms. Below is presented a very short extract(4 seconds in total) of the MoonBot log text file with brief explanations and highlights of the key features.

The MoonBot log text file with brief explanations and highlights of the key features.

Tick Chart. Display of All Orders on the Chart
Thanks to the API connection to the exchange, the terminal receives stream data of all filled orders on the exchange as soon as they were processed by the exchange servers and immediately displays them on the chart.
Tick Chart.
Thus, the visualization of the current state of the market is provided in real time with an accuracy of tens of milliseconds and as detailed as displaying each order on the chart.

Auto Trading on Signals
Fully automatic processing and trading off Telegram signals as well as parced TradingView alerts.

https://preview.redd.it/rw6im5wl1m931.png?width=1095&format=png&auto=webp&s=0ce7e7287dae27a0a71970083435fa93e592e5b5
Automatic Detection of Market Conditions and Reaction to its Changes
Thanks to streaming data acquisition, the terminal monitors all available markets simultaneously, and is therefore able to react almost instantaneously as favorable trading possibilities are presented. And due to the minimal delay in the execution of orders, MoonBot responds to abnormal changes almost instantly.

Advanced Orders. Stop Loss, Take Profit, Trailing Stop
OCO orders (one cancels the other) are one of the most sought-after functions from both the Exchanges providing liquidity to the markets, and applications running on top of the exchanges. The modern Trader cannot trade without the basic “smart” functions and addons to traditional exchange orders and considers them to be the minimum necessary set in their armory.

https://preview.redd.it/3gsh12b42m931.png?width=1200&format=png&auto=webp&s=7f21bd7e7505f9bb5a95555cf355bb6f1f5efab4
Stop Loss
One of the most important tools for Traders is to be able to place orders whilst practicing safe money management in order to mitigate against losses. One of the most important safety tools is to use a Stop Loss, which is especially important in volatile, low liquidity markets.
With MoonBot, the user can set a Stop Loss threshold (either as a percentage of the order price, or as a number of price points), which their strategy can accept should the price move in the opposite direction to that expected. When this threshold value has been reached, the order will be closed automatically.
Technically, a Stop Loss can be set up in two ways: either as a stop-limit order placed directly on the exchange at the same time as the initial position is opened; or as a function controlled in real-time by the MoonBot terminal itself. Additional types of conditional Stop Loss functions include:
  1. Additional and conditional Stop Losses – these are activated by a timer, and depend on the price reached. Thus Moonbot can raise the Stop Loss to a break-even point, or can be set to move upward to follow coin growth and to achieve higher profitability.
  2. BV/SV Ratio Stop Loss — this is a measure of buying/selling pressure and depends on the ratio of the volume of coin purchases compared against sales over a given time range. For example, if the number of sales exceeds the number of purchases, then this Stop Loss would be activated
  3. V-STOP — this is a stop which depends on the volume in the orderbook, where a price and volume level is set, which if broken will activate the Stop Loss.
  4. Trailing Stop — Trailing Stop is a General Stop Loss Management Tool. This very important feature allows the Trader to maximize profit in an automatic mode by following upward price movements, until the price reverses by a preset amount. At that stage the Stop Loss is activated.
    Take Profit
The Trader can fix the profit gained as the value of an asset increases in several ways:
  • By closing the position after a predefined profit percentage has been reached.
  • By remaining in the position, and setting the Stop Loss level to break-even, or to higher profit levels.

Algorithmic Trading
At the moment, MoonBot has 13 types of strategies in-built (manual) using specific and well-proven algorithms (algorithmic trading or algo-trading).
Together these have more than 200 adjustable parameters that can be adjusted to optimize their profitability across the wide range of trending and ranging markets that occur.
https://preview.redd.it/rgm2d6z13m931.png?width=1084&format=png&auto=webp&s=521830b9386e2890620ace5d829f53c3a76ceeb3
Trusted Management
MoonBot includes a successful and well-tested Trusted Management feature, in other words — Copy Trading:
  • All trade actions from the Master Terminal are repeated on the Follower’s Terminal (slave terminal).
  • The Follower’s deposit remains securely in their own personal exchange account.
  • The Trusted Management feature does not have direct access to money, or to direct trading on someone else’s account, but manages only its own Exchange orders, simultaneously broadcasting encrypted messages to Followers terminals containing all Master actions.

https://preview.redd.it/h8ak7b4g3m931.png?width=1023&format=png&auto=webp&s=caf33dad55ad6b51ed9f1e44316df9182b875eff
Trust Management is successfully implemented and used by members of our community. The statistics of those TM Traders who share their results can be reviewed on the website — stat.moon-bot.com on the RatingTM tab.
Community
During the two years of development of the MoonBot terminal, more than 30,000 copies have been registered and used by our Community of Traders.
Every day several thousand people trade cryptocurrencies using the MoonBot terminal, making daily approximately one hundred thousand manual and automatic transactions only on the leading crypto-currency exchange — Binance.
The existing community of traders is actively developing. The MoonBot project has its own active pages on popular social networks, in dedicated Telegram channels divided by topics, and also its own Trader’s forum available to subscribers.
Topics on the BitcoinTalk Forum
  • bitcointalk.org/index.php?topic=2234450.0
  • bitcointalk.org/index.php?topic=2234198.0
    Websites
  • moon-bot.com — the official site of the MoonBot.
  • forum.moon-bot.com — MoonBot forum.
  • stat.moon-bot.com — trade statistics of the community members, TOP-50.
    Telegram Groups
  • t.me/moon_bot_crypto — the main RU-chat for communication.
  • t.me/Moon_Bot_Public — main ENG chat for communication and support.
  • t.me/MoonBotSettings — RU technical support chat.
  • t.me/moon_bot_kurilka — general RU chat.
    Telegram Channel
t.me/MoonBotNews — the latest news and updates.
Social Network
www.facebook.com/MoonBotTerminal
The current Support team is actively assisting users and resolving their issues through dedicated Telegram channels.
submitted by MoonTrader_io to Moontrader_official [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

01-11 07:03 - 'Day 9: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how...' (self.Bitcoin) by /u/Darknicks removed from /r/Bitcoin within 293-303min

'''
Since Bastiat didn't post this today, I would like to post it again because it's necessary.
TL/DR
Bitcoin users can help lower transaction fees and improve Bitcoin by switching to SegWit addresses and encourage wallets and exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous Bitcoin transactions ([Understanding Segregated Witness]1 ). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India [have already implemented SegWit]2 and are reaping the benefits of reduced transaction fees. If Bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: [Saving up to 80% on Bitcoin transaction fees by batching payments]3 . Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all Bitcoin users to individually contribute to help strengthen and improve the Bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing Bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
[If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 180,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again]7 .
A few thousand Bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of Bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to Bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing Bitcoin through non-SegWit ready exchanges that are harming Bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use Bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your Bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your Bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
[Source 1: BitcoinCore.org]8
[Source 2: /Bitcoin]9
Official statements from exchanges:
  • Bitonic: [SegWit: In testing (including send from bech32). Batching: Have been for years. ]10
  • Kraken: [Deposits are made to Segwit addresses and withdrawls are sent in Segwit format, but frontend presentation is pending full implementation/support in wallets such as bitcoin core.]11
  • Shapeshift: [We don't order batch, but we will get to it. So much engineering to do :/]12
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
Where can I get a fee estimate for a SegWit transaction?
  • [Here's a good website that could help.]13
How can I get a SegWit address from my Bitcoin Core wallet?
  • Currently, Bitcoin Core hasn't implemented a way to get a SegWit address using the GUI. But you can get a receiving SegWit address using the debug console. To do it, go to the "Receive" tab and copy a receiving address (it starts with 1). Then just click Help > Debug window > Console and type: addwitnessaddress addr
  • You should replace addr with the receiving address that you just copied. Tap enter and you'll get an address (starts with 3). This is your SegWit address. You can use this one to receive funds. When you spend from this address, it will be a SegWit transaction. Easy huh?
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines Bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my Bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.5 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    [Source: HowToToken]14
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
  • Draw your own conclusions based on their own words:
    [March 2016 - Coinbase CEO Brian Armstrong has reservations about Core]15
    [Dec 2017 - Coinbase is STILL working on Segwit]16
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    [Source: BTCManager.com]17
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    [Source: BitcoinTalk.org]18
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any Bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
  • [HowToToken.com - How To Send Bitcoin Faster And Cheaper Over SegWit Transactions]19
  • [BTCManager.com - Electrum 3.0 is first Wallet to enable Bech32 SegWit Addresses]20
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
  • [Day 1: If every Bitcoin tx was a SegWit tx today, we'd have 8,000 tx blocks & the tx backlog would disappear. Tx fees would be almost non-existent once again. THE NEXT BITCOIN TX YOU MAKE, MAKE IT A SegWit TX. DOWNLOAD A SegWit COMPATIBLE WALLET AND OPEN A SegWit COMPATIBLE EXCHANGE ACCOUNT RIGHT NOW]21
  • [Day 2: I will repost this guide daily until available solutions like Segwit & order batching are adopted, the mempool is empty once again, and transaction fees are low. You can help. Take action today]22
  • [Day 3: ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI]23
  • [Day 4: Unconfirmed TX's @ 174K]24
  • [Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /Bitcoin SegWit effort?]25
  • [Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol]26
  • [Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol]27
  • [Day 8: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how you get low TX fees]28
Credits to: Bastiat
'''
Day 9: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how you get low TX fees
Go1dfish undelete link
unreddit undelete link
Author: Darknicks
1: *he**lletgen*us.co*/*nderstanding-segw*t**egr*g*t*d-witn***/ 2: b**g.z**pay*com*how-zebpa**re*uced-bit*o*n-tr*n*action-fe***a*e24c*88598 3: **tc*inte**tal**com/saving-u**to-80-on-bit*oi*-*ra*sac*io***e*s-b**batching-payments-4*47ab**0*fb 4: https://bitinfocharts.com/comparison/bitcoin-transactionfees.html#3m 5: https://blockchain.info/unconfirmed-transactions 6: se*wit.part**c*a*ts/ 7: *acke**oon*com/b*tcoin**wner**y*u-*eed-to-***the*e-two-t*ings-ri*ht-now-a73122***3*4 8: bitc***core.o***en/seg**t_adoption* 9: https://www.reddit.com/Bitcoin/comments/7kherf/what_exchanges_batch_there_withdrawal_txs_to_save/ 10: https://www.reddit.com/Bitcoin/comments/7mk8az/day_5_i_will_post_this_guide_regularly_until/drv127w/?context=3 11: https://twitter.com/krakenfx/status/949547526847307776 12: https://twitter.com/ErikVoorhees/status/947994430606229504 13: **inb.in/**ees 14: ***tot*ken.com/expl*ined**e*d-bitcoin-fa**er-che*p*r*S*gWit-transa****ns 15: https://blog.coinbase.com/what-happened-at-the-satoshi-roundtable-6c11a10d8cdf 16: https://blog.coinbase.com/bitcoin-segwit-update-3ab0484e4526 17: btcma*age*.*o**elec***m-*-0-firs*-wallet-en*bl*-b**h32-s*gw*t**ddresses/ 18: https://bitcointalk.org/index.php?topic=2347427.msg23976364#msg23976364 19: **wtotok*n.*om/expl*ined/send*bit**i*-fa**er-cheape**Se*Wit-tr*nsa*ti*n*/ 20: b*cm*nag*r.c*m/el***rum*3-0*f*rst-**llet-enabl*-be*h32-*egw*t-*ddresse*/ 21: https://www.reddit.com/Bitcoin/comments/7kyzxn/if_every_bitcoin_tx_was_a_SegWit_tx_today_wed/?utm_content=comments&utm_medium=user&utm_source=reddit&utm_name=frontpage 22: https://www.reddit.com/Bitcoin/comments/7l9tda/day_2_i_will_repost_this_guide_daily_until/ 23: https://www.reddit.com/Bitcoin/comments/7ljpf5/day_3_i_will_repost_this_guide_daily_until/ 24: https://www.reddit.com/Bitcoin/comments/7m6zd0/day_4_i_will_repost_this_guide_daily_until/ 25: https://www.reddit.com/Bitcoin/comments/7mk8az/day_5_i_will_post_this_guide_regularly_until/ 26: https://www.reddit.com/Bitcoin/comments/7na2xb/day_6_i_will_post_this_guide_regularly_until/ 27: https://www.reddit.com/Bitcoin/comments/7ojt5f/day_7_i_will_post_this_guide_regularly_until/ 28: https://www.reddit.com/Bitcoin/comments/7p9b1t/day_8_i_will_post_this_guide_regularly_until/
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

25$ Binance Dex Exchange Airdrop Join Fast #BİNANCE STAKİNG YAPARAK PARA KAZANMAK. #bitcoin kripto Para borsasında müthiş avantajlar. #link Bitcoin Halving Bull Run? Binance Launches Bitcoin Mining Pool - BitPay BUSD - Kim Jong Un BTC Stash Moon Bot for Binance and Bittrex TRANSFERINDO BITCOIN PARA A BINANCE  EXPERT BITCOIN #Binance Podcast Episode 5 - A Talk with Bitcoin Bull ... BITCOIN BULL RUN IN 30 DAYS SAYS CRYPTO TRADER - Binance Biggest Upgrade Ever Binance CEO Zhao Changpeng Talks Bitcoin - Ripple - South ... BitcoinTalk  How To Register On Bitcointalk  Full Process  In Hindi

Bitcoin Discussion General discussion about the Bitcoin ecosystem that doesn't fit better elsewhere. News, the Bitcoin community, innovations, the general environment, etc. Discussion of specific Bitcoin-related services usually belongs in other sections. Moderator: hilariousandco. 2279687 Posts 92131 Topics Last post by NotATether in Re: Satoshi Nakamoto a.k... on Today at 10:23:52 PM Child ... Bitcoin Wallet. Electrum. Armory. Bitcoin Core. GreenAddress. Blockchain.info. but both options are feasible depends on the case Quote; Share this post. Link to post Share on other sites. JorgeOvalle111 199 JorgeOvalle111 199 Jr. Member; Members; 199 207 posts; Posted October 6. There are many wallets that you can use to store your bitcoin and other tokens, if you want more security there are ... The main wallet we use here at BitcoinsInIreland.com for our bitcoins is the free open source Bitcoin Armory, which is a very secure desktop wallet, aimed at individuals and companies working with bitcoin who require all sorts of security on their coins.We’ve been beta testing the upcoming build of Armory, built on top of bitcoin core 0.10, which drastically is increasing the sync speed of ... Bitcoin Forum. Click for fresh comments and more information. Bitcoin Forum. November 06, 2020, 10:15:58 PM Welcome, Guest . News: Latest Bitcoin Core release: 0.20.0 Search. Home. Bitcoin Forum. Bitcoin. Bitcoin Discussion. General discussion about the Bitcoin ecosystem that doesn't fit better elsewhere. News, the Bitcoin community, innovations, the general environment, etc. Discussion of ... Bitcoin relies on a peer-to-peer network, a collection of computers called nodes that are linked with each other and run Bitcoin blockchain. It's called a blockchain because it contains blocks of codes that are chained together in chronological order, with each block having a record of transactions. Since the blockchain is present on every computer or node, nobody can make any changes on their ... Bitcoin wallets can also exist on third party exchanges, like Binance, which will temporarily store your Bitcoin after you buy it, or while you’re waiting to use it for trading. Bitcoin Armory is slow to get started with, but once you do, you have one of the most comprehensive and secure desktop bitcoin wallets around. Full control over sending and receiving bitcoin, really strong security, and paper backups to help you avoid having a complete loss in the event of hard drive failure. Simply reinstall on a new machine, load your backup, get it up to synch and carry on ...

[index] [14888] [7239] [7897] [6824] [6032] [14119] [2872] [10776] [22251] [10751]

25$ Binance Dex Exchange Airdrop Join Fast

One fundamental metric just reached levels not seen since just before the intense 2017 Bitcoin rally up to $20,000. Binance has completed its biggest platform upgrade in two years, it’s getting ... Bitcoin account kaise create karte hai aur Bitcoin wallet kya hota hai?-tutorial - Duration: 7:20. Abhishek Anand-Learn And Earn 86,818 views 11/08/2020 Binance borsasının sunduğu avantajları doğru kullandığınız da çok güzel kazanlar elde edebilirsiniz. Bitcoin son dönemde artmaya devam ediyor Link... Get Started on CryptoCurrency - Nano Ledger Wallet http://amzn.to/2DBJA9o - Stellar Desktop Wallet https://www.stellar.org/lumens/wallets/ ~ CoinBase https:/... 25$ Binance Dex Exchange Airdrop Join Fast 1=Bitcointalk Link Airdrop Link https://bitcointalk.org/index.php?topic=5221222.0 Join Airdrop Telegram Channel in... Veja como é fácil transferir bitcoins da sua carteira para a Binance. Saiba como pessoas comuns estão lucrando com BITCOIN. Sinta-se à vontade para entrar em contato. WHATSAPP: (22) 99962-5844 ... Robot de trading pour Bittrex & Binance fonctionnant en parallèle avec l'application Télégram. Lien de téléchargement: https://moon-bot.com Lien Bitcointalk:... Binance Pool’s first product offering will be Bitcoin mining, using a FPPS payment method. - BitPay Partners With Binance to Support BUSD Payments Around the World Thomas Lee, Co-founder of Fundstrat Global, joins Wei to share his thoughts from a fundamental valuation perspective on the current crypto market and on the ...

#